Download Sony Nex6 Digital Camera Firmware 1.03 For Mac
This update only applies for NEX-6 cameras that currently have a firmware version 1.02 or earlier. If your camera firmware version is already version 1.03, this update is not necessary. Check the version of your camera firmware: Power on the camera. Press the Menu button. At the 'Menu' screen, use. View and Download Sony Alpha NEX-6 instruction manual online. Interchangeable Lens Digital Camera. Alpha NEX-6 Digital Camera pdf manual download. Also for: Nex-6l/b, Nex-6/b, Alpha nex-6l. Brand:Sony, Product:Digital Camera, Model: NEX-6, Firmware: 1.03, OS: Mac OS X. Sony NEX-6 Camera Firmware 1.03 Mac OS X was collected from Sony official site for Sony Digital Camera. In order to ensure the right driver download, Official driver links from Sony are listed at first.
Digital Camera Firmware Updates
For Windows 8 or Windows 8.1 users: Under the initial settings of Internet Explorer, the update file will be saved in the Downloads folder. Click the Desktop tile from the Start screen and find the downloaded file in the Downloads folder by using Explorer. • Close all currently running programs on your computer. Double-click Update_NEX6V103.exe to start up Firmware Updater.
• The firmware version is displayed. If your firmware version is Ver 1.03 or later, the upgrade is not required. System Requirements Supported OS • Mac OS X v.10.5 – 10.11 If you are using Mac OS X Ver.10.10 or later, you need to run Driver Loader, a preparatory application, before updating the system software. If you are using Mac OS X Ver.10.9 or earlier, you do not need to run Driver Loader. Other system requirements • CPU: Intel processor * Core Solo and Core Duo processors are no longer supported. • Hard disk space: 200MB or more • RAM: 512MB or more * Please close all other application software before upgrading the firmware.
1.03, the upgrade is not required. According to the message, stop the USB connection and click Finish. Turn off the camera, remove the battery pack or the AC adaptor, reinsert the battery pack or connect AC adaptor, and then turn on the camera. Upgrade is not required • Screen below appears. • Press the center of the control wheel to reset the camera. Camera’s LCD screen Figure 10: Camera control wheel Note: The screen turns off when the center of the control wheel is pressed. Lexmark prospect pro205 installation.
We will be able to provide lenses that can even better satisfy our customers. Improvements from firmware version 1.00 to version 1.01 • Provides support for the following Fast Hybrid AF function compliant lenses: SEL1018, SEL35F18, SELP18200, SEL30M35, SEL50F18, SEL18200LE The firmwares of the following lenses are also required to be updated in addition to this update: SEL30M35, SEL50F18, SEL18200LE. - - For SEL18200LE, please contact nearest Sony service centre for firmware update. How to check the firmware version • Select Menu → Setup → Version on the camera. • The firmware version is displayed. If your firmware version is Ver 1.03 or later, the upgrade is not required. System Requirements Supported OS • Mac OS X v.10.5 – 10.11 If you are using Mac OS X Ver.10.10 or later, you need to run Driver Loader, a preparatory application, before updating the system software.
System Requirements Supported OS • Windows 10 • Windows 8.1 • Windows 7 SP1 Other system requirements • Hard disk space: 200MB or more • RAM: 512MB or more * Please close all other application software before upgrading the firmware. Other Items • Power source for the camera Fully charged rechargeable battery pack NP-FW50 or AC adaptor AC-PW20 (sold separately) Note: The upgrade can be performed only when the remaining battery level is (three marks) or more. We recommend that you use a fully charged battery or the AC adaptor AC-PW20 (sold separately). • USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable. Details IMPORTANT: • When performing the firmware upgrade, please use a fully charged rechargeable battery pack NP-FW50 or the AC adaptor AC-PW20 (sold separately).
• After resetting, reconnection of the camera is verified, and the screen below appears. • Click Run to start the upgrade. The progress bar appears while upgrading (approximately 5 minutes). Note: Never turn off the camera nor disconnect the USB cable while upgrading. • When the upgrade is completed, the screen below appears. Click Finish and disconnect the USB cable. • Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again.
We recommend that you use a fully charged battery or the AC adaptor AC-PW20 (sold separately). • USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable. Details IMPORTANT: • When performing the firmware upgrade, please use a fully charged rechargeable battery pack NP-FW50 or the AC adaptor AC-PW20 (sold separately). • Do not remove the battery or AC adaptor during the upgrade; otherwise, the camera may become inoperable due to the sudden power shutdown. • Remove the memory card from the camera beforehand. Start Firmware Updater • Save the downloaded file onto the Desktop of your computer (recommended).
The screen below appears on Firmware Updater. Camera’s LCD screen Note: From this step onwards, never turn off the camera until the firmware upgrade is completed. • After confirming the screens on the above steps, click Next. The current version and the version after the upgrade appear on the lower left part of the screen. Upgrade is required, click Next. If the screen below appears, the upgrade is not required.
- Disconnect the USB cable and connect it again. - If the computer has multiple USB terminals, try with the other terminals. (Your computer may have some USB terminals on the backside.) • Confirm is displayed on the task tray at the lower right corner of the computer screen. Note: If the icon is not displayed on the task tray, please proceed to the next step. • After confirming the above, click Next on Firmware Updater. The screen below appears on Firmware Updater. Camera’s LCD screen Note: From this step onwards, never turn off the camera until the firmware upgrade is completed.
Upgrade is not required • Click on the task tray at the lower right corner of the computer screen to stop the USB connection. Notes: - Please keep the USB cable connected even after stopping the USB connection on the computer with the above operation. - If the icon is not displayed on the task tray, please proceed to the next step.
If you are using Mac OS X Ver.10.9 or earlier, you do not need to run Driver Loader. Other system requirements • CPU: Intel processor * Core Solo and Core Duo processors are no longer supported. • Hard disk space: 200MB or more • RAM: 512MB or more * Please close all other application software before upgrading the firmware. Other Items • Power source for the camera Fully charged rechargeable battery pack NP-FW50 or AC adaptor AC-PW20 (sold separately) Note: The upgrade can be performed only when the remaining battery level is (three marks) or more. We recommend that you use a fully charged battery or the AC adaptor AC-PW20 (sold separately). • USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable.
• When the updater recognizes the camera connection the following screen is displayed, and the camera screen displays the message, 'Follow computer instructions.' • At the 'Firmware Updater' window, click 'Next'. • When the following screen is displayed, check the version number at the lower left. If the current version is 'Ver.1.00, click 'Next'. Note: If the current version is 'Ver.1.01', your camera does not need this update. Stop the USB connection, click 'Finish', then remove the battery or disconnect the AC adaptor briefly, and then power on the camera again. • When the following screen is displayed, Press the center button of the Control Wheel to reset the camera.
• USB cable supplied with the camera Note: Update functionality is not guaranteed with any other USB cable. Details IMPORTANT: • When performing the firmware upgrade, please use a fully charged rechargeable battery pack NP-FW50 or the AC adaptor AC-PW20 (sold separately).
Upgrade is not required • Press the center of the control wheel to reset the camera. Camera’s LCD screen Figure 10: Camera control wheel Note: The screen turns off when the center of the control wheel is pressed. Please proceed to the next step. • Click Next on Firmware Updater. • After resetting, reconnection of the camera is verified, and the screen below appears. • Click Run to start the upgrade. The progress bar appears while upgrading (approximately 5 minutes).
DriverFilesDownload.com is a professional sony Driver Files Download Site, you can download Sony NEX-5R Digital Camera Firmware 1.03 for MAC driver files here, fit for Mac, it is the sony Cameras Webcam driver files, Sony NEX-5R Digital Camera Firmware 1.03 for MAC driver files is 100% clean and safe, Just Download Sony NEX-5R Digital Camera Firmware 1.03 for MAC Driver Files with 100% confidence Now! Driver Name Sony NEX-5R Digital Camera Firmware 1.03 for MAC OS Mac File Size 192.9 MB File Name Category Cameras Webcam Download.
Thank you for your continued interest in Sony products. Sony is offering a firmware upgrade for Interchangeable Lens Digital Camera NEX-5R. Improvements after firmware upgrade • Provides support for the following ”Fast Hybrid AF” compliant lenses for SELP18105G, SEL35F28Z *, SEL55F18Z *, SEL2470Z *, SEL2870 *, SEL70200G * and compatible E mount lenses in the future * * Fast Hybrid AF is effective only in the central area of the frame Improvements from firmware version 1.01 to version 1.02 • Provides support for the Fast Hybrid AF function compliant lenses: SEL20F28 and SEL1670Z. • Addition of AF drive system for movies AF drive system for movie was added in order to enhance the scalability of future E-mount systems. This feature ensures a higher degree of flexibility in the design of future E-mount lenses.
Olympus Digital Camera Firmware
Thank you for your continued interest in Sony products. Sony is offering a firmware upgrade for Interchangeable Lens Digital Camera NEX-7. Improvements after firmware upgrade • Addition of AF drive system for movies AF drive system for movie was added in order to enhance the scalability of future E-mount systems. This feature ensures a higher degree of flexibility in the design of future E-mount lenses. We will be able to provide lenses that can even better satisfy our customers.
Please proceed to the next step. If the LCD screen of the camera dose not turn off, please try the following methods. - Disconnect the USB cable from the camera, then reconnect the USB cable. - If there are another USB terminal with the computer, reconnect the USB cable to another USB terminal. • Click Next on Firmware Updater. The screen below appears on Firmware Updater Camera’s LCD screen Note: From this step onwards, never turn off the camera until the firmware upgrade is completed.
Double-click Update_NEX7V103.dmg to start up Firmware Updater. • Double-click the Update_NEX7V103 icon which appears on the Desktop. • Double-click the FirmwareUpdater icon. • To load a kernel extension, the message prompts you to allow the application to make changes. Type the password for the administrative account. • Firmware Updater starts up.
• Check the USB connection mode Turn on the camera, select Menu → Setup → USB Connection on the camera, and confirm Mass Storage is selected. • Remove the memory card from the camera, and then connect the camera to the computer with the supplied USB cable. Note: When the camera is connected to the computer, the LCD screen of the camera turns off. Please proceed to the next step. If the LCD screen of the camera dose not turn off, please try the following methods. - Disconnect the USB cable from the camera, then reconnect the USB cable. - If there are another USB terminal with the computer, reconnect the USB cable to another USB terminal.
Start Firmware Updater • Do not connect the camera yet at this point. Double-click Update_NEX6V103.dmg to start up Firmware Updater. • Double-click the Update_NEX6V103 icon which appears on the Desktop.
• At the 'Setup' screen, use the Control Wheel to scroll to 'USB Connection' and verify that 'Mass Storage' is selected. • Download the Update_NEXF3V101.dmg file to a temporary or download directory (please note this directory for reference). • Go to the directory where the file was downloaded and double-click the Update_NEXF3V101.dmg file. Note: Do not connect the camera to the computer yet. • On the desktop, double-click the Update_NEX5nV101 icon. • Double-click the 'Firmware Updater' icon. • At the Password prompt screen, enter the Name and Password for the administrative account, and then click 'OK'.